Two-component epoxy mastic with high adhesion with properties of high resistance to UV rays and atmospheric agents.
It is suitable for repairing, grouting or puttying marbles, granites, ceramics and artificial ones in general. The product, due to its very low shrinkage and high thixotropicity, shows excellent performance in vertical applications and hole filling.
Mixing ratio A:B: 2:1
Gel time at 25 °: 4-6 h
Complete curing at 20°: 8-10 h
Lithopoxy (3:1)
General Information
Lithopoxy 3:1 RATIO LIQUID EPOXY is an epoxy liquid resin and mastic for bonding and strengthening natural stones in industrial use with 3:1 mixing ratio.
It is suitable for crack repair of plates, netting operations, repair and reinforcement of blocks.
It is used for bonding old and new concrete layers, producing dry aggregate non-slip floors, anti-scratch floor coverings, attaching assembly rails and iron components to concrete.
It improves the surface properties and reduces the waste rate to a minimum level, thus preventing material wastage.
Products Details
Appearance: Flowıng
Base: Epoxy
Avaılable colors: Transparent
Applıcatıon area: Indoor & Outdoor
Mıx ratıo: 3:1
Gel tıme (25°C): 50-60 mınutes
Full cure tıme (25°C): 8 hours
Products Usage
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of resin (A) and mix it with catalyst (B) until they can be identified with each other with 3A:1B mixing ratio by volume .
Apply the mixed resin by pouring it on the area to be applied and spread it uniformly.
Allow to cure for approximately 24 hours at ambient temperature. The curing process can be speeded up by application of heat. Low ambient temperatures can slow setting of resin down.
Lithos Colorant
Universal coloring pastes to color all the products of the Lithos Colorant line.
Available Colors: Black, Ocher, Grey, Red, Botticino, Yellow, White, Blue, Beige, Brown and Green.