Protecting Surfaces.
Preserving Beauty.

Waterstop

General Information
  • Litho WATERSTOP is a water based natural look water repellent sealer.
  • It does not alter original colour and appearance.
  • It hampers absorption of common water and watery stains.
  • Offers long lasting, renewable protection.
  • Provides easy cleaning and daily maintenance.
  • Due to its high UV resistance, it prevents color fading caused and yellowing.
  • It protects the surface against moss, mold and efflorescence.
  • Base: Water
  • Avaılable colors: Natural effect
  • Applıcatıon area: Indoor & Outdoor
  • Coverage: 4-18 m2/lt
  • Lithos WATERSTOP is a "ready to use" sealer and steps for correct usage are as follows;
  • The surface on which the product will be applied must be dry and free of any absorbant varnish.
  • Apply 1 coat of the product liberally to the surface with a brush or roller.
  • Wait minimum 30 mins for the stone to absorb.
  • After the product is well absorbed by the stone, apply the second coat.(For high absorbent stones, 3 coats maybe be required.)
  • Rub the material on the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface.
  • To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.

Maxiwet

General Information
  • Litho MAXIWET is a solvent based wet look effect sealer for roughfinished surfaces with water repellent agents.
  • It enhances the color of the stone.
  • It hampers the absorption of common water and watery stains.
  • Ideal for protecting tumbled marble, travertine, bathroom tops, kitchen counters, slates, sand and limestone.
  • Thanks to its high UV resistance, it prevents color fading caused and yellowing.
  • It protects the surface against moss, mold and efflorescence.
  • Base: Solvent
  • Avaılable colors: Wet effect
  • Applıcatıon area: Indoor & Outdoor
  • Coverage: 4-9 m2/lt
  • Lithos MAXIWET is a "ready to use" sealer and steps for correct usage are as follows;
  • The surface on which the product will be applied must be dry and free of any absorbant varnish.
  • Apply 1 coat of the product liberally to the surface with a brush or roller.
  • Wait for the stone to absorb. Rub the material on the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface.
  • Wait for 8 hours for the product to be absorbed.
  • After the product is well absorbed by the stone, apply the second coat.
  • To increase the "wet look effect" increase the number of application.
  • The surface will be ready to be walked on after 8 hours of the latest application.

Eliogard Glossy

General Information
  • Litho ELIOGARD GLOSSY FINISH is a solvent-based protective coating specifically formulated for glossy natural stone surfaces. Designed to safeguard acid-sensitive materials like marble, limestone, and travertine, it creates an ultra-thin, invisible shield that preserves the stone’s natural gloss while providing 100% acid resistance.
  • Superior Acid Protection for Long-Lasting Shine
  • Fully resistant to acid etching caused by lemon, vinegar, wine, coffee, tea, fruit juices, oil, and cleaning products.
  • Prevents staining, dull spots, and surface degradation on polished stone surfaces.
  • Helps retain the high-gloss finish of marble and other calcareous stones.
  • Ensures easy cleaning and maintenance, reducing the need for frequent polishing.
  • High-Performance, Durable Protection
  • UV-resistant, making it suitable for both interior and exterior applications.
  • Base: Solvent
  • Avaılable colors: GLOSSY FINISH
  • Applıcatıon area: Indoor & Outdoor
  • Coverage: 2.5 m2/lt
  • Lithos ELIOGARD GLOSSY FINISH must be applied only by certified professionals approved by Lithos. Incorrect application may affect performance and void the warranty.
  • Surface Prep & Application Summary:
  • Protect surrounding areas and ensure good ventilation.
  • Apply only between 5–40°C; avoid rain for 5 hours post-application.
  • Sand and clean previously coated surfaces thoroughly; use acetone and avoid silicone-based products or perfumes during application.
  • Fill pores before coating to avoid bubbles.
  • Application Steps:
  • 1- Primer: Apply a thin coat; cure for 8–12 hrs.
  • 2- Sanding: Use 1200–1500 grit to smooth the surface.
  • 3- Mixing: Combine ELIOGARD A & B (2:1), add thinner (≈50%), and 0.5–1% anti-silicone.
  • 4- Coating: Apply two layers; allow 24 hrs to cure.
  • 5- Finishing: Sand if needed (1200–3000 grit) with water.
  • 6- Polishing: Use ELIOGARD PASTE 1-2-3 with water and a polishing tool.
  • For full instructions and technical requirements, check the TDS files.

StainOff

General Information
  • Litho STAINOFF is an exceptionally rapid and highly efficient stain remover, specially designed for a wide range of surfaces, including carpets, sofas, as well as natural and synthetic stone.
  • It removes stubborn stains like organic stains (fruit & vegetable juice), grease, coffee, wax, ink etc.
  • It dries quickly and leaves no sticky feeling.
  • It does not alter the surface color and appereance.
  • It cleans without damaging the surface
  • Exteremely easy to use.
  • Appearance: Flowıng
  • Base: Acid
  • Avaılable colors: Water clear
  • Applıcatıon area: Indoor & Outdoor
  • Coverage: 15-20 m2/lt
  • Lithos STAINOFF is a "ready to use" Stain Remover and steps for correct usage are as follows;
  • Spread over the product and wait for a few minutes for stains to be dissolved
  • Vacuum or wipe up residue, rinse with plenty of water.

LithoCleans

General Information
  • LithoCleans is a acid based tile and grout cleaner.
  • It removes all rust, grout, cement residues and construction site dirts.
  • It does not alter the surface color and appereance.
  • It does not emit fumes that are harmful to users or environment.
  • Depending on dilution rate, it can be used as either a detergent or lime remover.
  • Appearance: Flowıng
  • Base: Acid
  • Avaılable colors: Water clear
  • Applıcatıon area: Indoor & Outdoor
  • Coverage: 15-20 m2/lt
  • Litho Cleans is a "ready to use" acidic tile and grout cleaner and steps for correct usage are as follows;
  • Dilute 1:5 or 1:10 ml of Litho Cleans depending on the type of soil to be removed.
  • Spread over and clean the surface with a single-disc professional cleaner or rag and clean.
  • Vacuum or wipe up residue, rinse with plenty of water.

Litho Epoxy HAZE Remover

General Information
  • Litho Epoxy HAZE Remover is safe and effective natural stone grout cleaner that provide multipurpose cleaning.
  • It removes cement & epoxy grout residues, construction residues, stubborn dirts and water based waxes on acid-sensitive stones.
  • It cleans surface without damage.
  • It is excellent for basic cleaning of acid-sensitive stones.
  • It helps restore the look of grout.
  • Appearance: Flowıng
  • Base: Acid
  • Avaılable colors: Water clear
  • Applıcatıon area: Indoor & Outdoor
  • Coverage: 15-20 m2/lt
  • Lithos Epoxy remover is a "ready to use" Natural Stone Grout Cleaner and steps for correct usage are as follows;
  • Dilute 1:5 or 1:10 ml of Litho Epoxy Remover depending on the type of soil to be removed. To remove wax or epoxy grout residues, apply the product directly on the residue and leave to react for 15-20 mins.
  • Spread over and clean the surface with a single-disc professional cleaner or rag and clean
  • Vacuum or wipe up residue, rinse with plenty of water.

Litho Guard

General Information
  • Advanced lithium chemistry which is water-based solution requires no rinsing and is VOC compliant in all areas of the world. When applied on surface, it penetrates up to ¼ inch (7mm) where it reacts with free calcium to form insoluble calcium silica hydrate, which makes marble or stone more water, stain, and abrasion resistant for easier maintenance and longer life. It is also suitable for marble, natural stones and concrete polishing procedures and helps prolong the life of polished finishes.
  • CODE: 08030155
  • COLOR: Transparent colorless
  • PACKAGING: 5-liter bucket
  • For the treatment of ground and polished absorbent marble, natural stone, lime stone, used for strengthening stone. The colour tone and the ability of the stone to breathe remain unaltered.

Stone Sealer & Soap

General Information
  • Litho Stone Sealer & Soap, water-repellent and brightening detergent.
  • Clean, polish and protect stone surfaces.
  • Excellent for maintenance of marble floors.
  • Ideal for washing surfaces after polishing.
  • Makes the surface water- repellent.
  • CODE: 08030155
  • COLOR: Transparent colorless
  • PACKAGING: 5-liter bucket
  • Litho Stone Soap is a "ready to use" Natural Stone Grout Cleaner and steps for correct usage are as follows;
  • Dilute 1:5 or 1:10 ml of Litho Stone Soap depending on the type of soil to be removed. To remove wax or epoxy grout residues, apply the product directly on the residue and leave to react for 15-20 mins.
  • Spread over and clean the surface with a single-disc professional cleaner or rag and clean
  • Vacuum or wipe up residue, rinse with plenty of water.
Facebook Instagram Youtube Whatsapp

Heliolite India Pvt. Ltd.

Plot # 18, Saibaba Nagar, Tellapur, R C Puram, Hyderabad – 502032, Telangana, India

Heliolite Group LLC

64 Cabin court, Southgate West Essex , RH 118 sx Crawley, United Kingdom.

Products

Quick Links

© 2026 Heliolite India. All rights reserved.

Need the right adhesive solution?

Quick Links

Heliolite India Private Limited

Facebook Instagram

© 2026 Helioliteindia All right reserved